A walk-in shower, walk-in shower or tiled shower base can enhance the look of your shower and also improve its waterproofing and functionality. A waterproofing problem with a tiled shower base can make it a hazard if it becomes wet. A wet base causes a buildup of moisture that causes the slabs to crack and break apart. Several waterproofing problems can be corrected by some simple remodelling and one of these is a problem with the tiled shower drain.
Walk-in shower pans are not recommended for use with tiled shower bases because of the potential for sub-floor moisture. You do not want water from a shower to leak onto your tiled shower base and potentially damage the slabs. A proper waterproofing solution should be used before installing the tiled shower pan. It's always a good idea to consult with a professional in this area to ensure you have followed all local codes. A tiled shower pan that is too large will make it difficult for walk-in shower remodellers to work and if it is too small the flow of water can be reduced.
There are a few different waterproofing solutions that can be applied after the base has been installed. One option is to pour an acrylic mixture into the space between the floor and wall. This waterproofing agent will seal the gap and also stop water from leaking onto the shower floor. The problem with this method is that it takes time for the acrylic mixture to dry so it may be necessary to wait for several days until the mixture dries. Another option is to place a thin piece of plywood over the mortar base and then place a waterproofing membrane across the top. This is a great solution but it is fairly easy to make a mistake and end up with cracked mortar.
Installing a shower drain involves taking out the old shower drain and lining it up with the new tiled floor tile. The old shower drain should be removed carefully and any parts that are glued down should be carefully removed. Once the old shower drain is free it can be lined up properly with the new mortar base and then the drain installed. Depending on the design of the shower drain this may include cutting the drain holes. When installing a shower drain it is a good idea to line it up one hole at a time to ensure there is no space between them.
If a tiled shower base and waterproofing membrane are used then it should be checked periodically to make sure they are still in good condition. Improperly waterproofed areas can cause mould to grow under the shower pan and between the walls if left untreated. Cracks can form in the tiling and walls if the water seeps in during a shower. Leaks can also occur under the shower pan if the floor tiles are not properly installed.
Some people decide to waterproof their shower base themselves by using an adhesive that is similar to what is used to attach masonry siding to the outside of a house. However, using this method can cause the walls to become weak since the waterproofing ingredient is so watertight. For this reason, some people choose to use a foam shower base with a silicone sealer that can provide much more strength to the walls while providing excellent waterproofing. These shower pan membranes are available in a variety of styles and sizes.
No comments:
Post a Comment